Deep Sea Exploration Standard
WIA-OCEAN-001 establishes comprehensive standards for deep sea exploration technologies, enabling safe, efficient, and sustainable ocean floor research. This standard covers submersibles, ROVs, sensors, and data collection systems for depths exceeding 1,000 meters.
| Component | Specification | Standard |
|---|---|---|
| Operating Depth | 0 - 11,000 meters | ISO 23274-1 |
| Hull Material | Titanium Alloy (Ti-6Al-4V) | ASTM B265 |
| Communication | Acoustic Modem (10-30 kHz) | IEEE 802.11u |
| Imaging | 4K UHD (3840x2160) | ITU-R BT.2020 |
| Sensors | CTD, pH, DO, Turbidity | ISO 10523 |
| Navigation | INS/DVL Hybrid System | IEC 61162 |
| Power Supply | Li-Ion Battery 100 kWh | UN 38.3 |
| Data Storage | Solid State 10 TB | MIL-STD-810G |
import { DeepSeaExplorer } from '@wia/ocean-001';
// Initialize deep sea exploration system
const explorer = new DeepSeaExplorer({
vehicleId: 'DSV-001',
maxDepth: 6000, // meters
sensors: ['ctd', 'camera', 'sonar', 'sampler']
});
// Start dive mission
await explorer.startMission({
targetDepth: 4500,
duration: 8, // hours
route: [
{ lat: 36.7128, lon: -122.1856, depth: 0 },
{ lat: 36.7100, lon: -122.1900, depth: 4500 },
{ lat: 36.7080, lon: -122.1920, depth: 4500 }
]
});
// Collect environmental data
const data = await explorer.sensors.ctd.read();
console.log(`Temperature: ${data.temperature}ยฐC`);
console.log(`Salinity: ${data.salinity} PSU`);
console.log(`Pressure: ${data.pressure} dbar`);
// Capture video
await explorer.camera.record({
resolution: '4K',
duration: 300, // seconds
lights: 'auto'
});
// Collect sample
await explorer.sampler.collect({
type: 'sediment',
volume: 500, // ml
location: { lat: 36.7080, lon: -122.1920 }
});
// Return to surface
await explorer.ascend({
rate: 30 // meters per minute
});
WIA-OCEAN-001์ ์ฌํด ํ์ฌ ๊ธฐ์ ์ ๋ํ ํฌ๊ด์ ์ธ ํ์ค์ ํ๋ฆฝํ์ฌ ์์ ํ๊ณ ํจ์จ์ ์ด๋ฉฐ ์ง์ ๊ฐ๋ฅํ ํด์ ์ฐ๊ตฌ๋ฅผ ๊ฐ๋ฅํ๊ฒ ํฉ๋๋ค. ์ด ํ์ค์ 1,000๋ฏธํฐ ์ด์์ ๊น์ด๋ฅผ ์ํ ์ ์์ , ROV, ์ผ์ ๋ฐ ๋ฐ์ดํฐ ์์ง ์์คํ ์ ๋ค๋ฃน๋๋ค.
| ๊ตฌ์ฑ ์์ | ์ฌ์ | ํ์ค |
|---|---|---|
| ์๋ ๊น์ด | 0 - 11,000 ๋ฏธํฐ | ISO 23274-1 |
| ์ ์ฒด ์ฌ๋ฃ | ํฐํ๋ ํฉ๊ธ (Ti-6Al-4V) | ASTM B265 |
| ํต์ | ์ํฅ ๋ชจ๋ (10-30 kHz) | IEEE 802.11u |
| ์์ | 4K UHD (3840x2160) | ITU-R BT.2020 |
| ์ผ์ | CTD, pH, DO, ํ๋ | ISO 10523 |
| ํญ๋ฒ | INS/DVL ํ์ด๋ธ๋ฆฌ๋ ์์คํ | IEC 61162 |
| ์ ์ ๊ณต๊ธ | Li-Ion ๋ฐฐํฐ๋ฆฌ 100 kWh | UN 38.3 |
| ๋ฐ์ดํฐ ์ ์ฅ | ์๋ฆฌ๋ ์คํ ์ดํธ 10 TB | MIL-STD-810G |
import { DeepSeaExplorer } from '@wia/ocean-001';
// ์ฌํด ํ์ฌ ์์คํ
์ด๊ธฐํ
const explorer = new DeepSeaExplorer({
vehicleId: 'DSV-001',
maxDepth: 6000, // ๋ฏธํฐ
sensors: ['ctd', 'camera', 'sonar', 'sampler']
});
// ์ ์ ์๋ฌด ์์
await explorer.startMission({
targetDepth: 4500,
duration: 8, // ์๊ฐ
route: [
{ lat: 36.7128, lon: -122.1856, depth: 0 },
{ lat: 36.7100, lon: -122.1900, depth: 4500 },
{ lat: 36.7080, lon: -122.1920, depth: 4500 }
]
});
// ํ๊ฒฝ ๋ฐ์ดํฐ ์์ง
const data = await explorer.sensors.ctd.read();
console.log(`์จ๋: ${data.temperature}ยฐC`);
console.log(`์ผ๋ถ: ${data.salinity} PSU`);
console.log(`์๋ ฅ: ${data.pressure} dbar`);
// ๋น๋์ค ์ดฌ์
await explorer.camera.record({
resolution: '4K',
duration: 300, // ์ด
lights: 'auto'
});
// ์ํ ์์ง
await explorer.sampler.collect({
type: 'sediment',
volume: 500, // ml
location: { lat: 36.7080, lon: -122.1920 }
});
// ์๋ฉด์ผ๋ก ๋ณต๊ท
await explorer.ascend({
rate: 30 // ๋ถ๋น ๋ฏธํฐ
});