Chapter 1
Wireless charging moves energy across an air gap with no connector. Moving it efficiently and safely is harder than it looks. The gap makes the link lossy, and the fields that carry the power also heat any metal that wanders into them. A charger and a receiver from different makers must also agree on how much power to send. WIA-COMM-008 (version 1.0.0, category COMM, status Active) treats these as one problem. It brings Qi inductive coupling, magnetic resonance charging, power-delivery negotiation, efficiency optimization, foreign object detection (FOD), thermal management and electromagnetic field (EMF) safety into one framework. The same framework spans earbuds and electric vehicles.
This first chapter orients the reader. It sets out which power classes the standard covers, the physics and protocols underneath them, and the safety mechanisms that keep a coil from becoming a heater. It then shows how the standard's records and API describe a charger so that two parties can compare notes without guessing.
The standard sorts chargers by power class. Each class implies a different coil arrangement, frequency band and control channel. The Phase 1 charger record groups devices as follows.
| Class | Typical members | Frequency band | Communication channel |
|---|---|---|---|
| Low-power inductive | Qi 5 W and 15 W (WPC) | Qi LF, 87-205 kHz | Qi in-band ASK |
| Mid-power resonant | Qi 30 W and above, AirFuel, proprietary systems | AirFuel HF, 6.78 MHz | AirFuel uses BLE |
| High-power EV | SAE J2954 WPT 1/2/3 at 3.7 / 7.7 / 11.1 kW | J2954, 79-90 kHz | LIN/CAN sideband |
| Experimental | 22 kW WPT 4; MHz/GHz beaming is catalogued separately in WIA-COMM-009 | Varies | Varies |
The overview material also gives a coarser ladder: low (5 W), medium (15 W), high (50 W and above) and EV, up to 350 kW. It cites ISO 19363 alongside SAE J2954 for vehicles. The standard's summary tables and the Phase 1 envelope do not label every J2954 class the same way. An implementer should therefore record explicit power and frequency values on each charger instead of relying on a class label alone.
Inductive charging rests on Faraday's law. A changing current in the transmitter coil produces a changing flux. That flux induces a voltage in the receiver coil, and the voltage is proportional to the mutual inductance between the coils. The standard writes this as follows.
V₂ = M × dI₁/dt
M = k × √(L₁ × L₂)
The coupling coefficient k runs from 0 to 1. It falls steeply with separation (the specification gives k ∝ 1/d³ for circular coils). It peaks at perfect alignment and also depends on coil diameter, turn count, wire gauge and core material (air, ferrite or nanocrystalline). The Phase 1 coil descriptor puts typical k at 0.1-0.3 for loosely coupled inductive systems and 0.05-0.15 for resonant ones. In practice a charging pad never approaches the coupling of a transformer.
Efficiency is measured end to end. For example, the SDK sample takes 15 W in and 12 W out at a 5 mm gap:
η = (P_out / P_in) × 100% → (12 / 15) × 100% = 80%
Because k is small, the quality factor Q = 2πfL / R carries much of the design. Weak coupling can still deliver power when the coil has high inductance at the operating frequency and low AC resistance. Magnetic resonance goes further by tuning each side to the frequency where inductive and capacitive reactance cancel:
f₀ = 1 / (2π × √(L × C))
η_max = (k × Q)² / (1 + k × Q)² (Q = √(Q₁ × Q₂))
The efficiency expression is quoted as the specification writes it. It shows why a resonant link with a high Q can stay useful when k is low. The trade-offs between the two approaches are summarized below.
| Property | Inductive (Qi) | Resonant (AirFuel) |
|---|---|---|
| Range | 0-10 mm | 0-50 mm |
| Typical efficiency | 70-85% | 60-80% |
| Frequency | 110-205 kHz consumer, 85 kHz EV | 6.78 MHz |
| Strengths | Mature, widely adopted, cost-effective | Longer range, multiple devices, flexible positioning |
| Limits | Short range, precise alignment | Higher cost, larger components |
The Qi standard from the Wireless Power Consortium (WPC) is the most widely adopted wireless charging standard for consumer electronics. Its Baseline Power Profile (BPP) covers 0-5 W at 5 V and up to 1 A. Its Extended Power Profile (EPP) covers 5-15 W at 9 V or 12 V and up to 1.67 A. Qi v1.3 reaches up to 30 W across 87-205 kHz.
The receiver talks to the transmitter by load modulation. It varies its load at 2 kHz, so the transmitter sees the changes as backscatter in its own coil current. The data rate is 2 kbps. The packets carry signal strength, control and power-request messages in this form:
[Preamble] [Header] [Message] [Checksum]
11 bits 1 byte 0-27 bytes 1 byte
A charging session moves through six phases:
The early phases are the protection. The transmitter does not apply full power until a receiver has answered, so a coin or key never sees more than a probing pulse. AirFuel uses Bluetooth Low Energy instead of in-band signalling. BLE handles device discovery, power negotiation, authentication and status monitoring. J2954 vehicle systems use a LIN/CAN sideband.
Coil design is where efficiency is won or lost. For a flat spiral coil the standard gives L ≈ (μ₀ × N² × r²) / (8r + 11w), with N the turn count, r the mean radius and w the winding width. At charging frequencies, skin and proximity effects raise AC resistance. Litz wire counters this with many insulated strands, which lowers resistance and raises Q. Ferrite behind the coil raises inductance by 2-5×, steers the flux forward and shields nearby electronics. The materials named include MnZn grades PC40, PC95 and 3F3.
Foreign object detection protects people and hardware. A metal object in the field absorbs power and heats up. The Phase 1 FOD envelope lists several detection methods. One is power-loss accounting as in Qi v1.3, which compares power sent against power reported received, using a calibrated reference. Another is parametric Q measurement on the transmit coil. The CLI exposes a detection check with a threshold and a baseline impedance:
wia-comm-008 detect-fod --threshold 0.1 --baseline-impedance 50
Two further concerns complete the safety picture:
optimize-align --offset-x 2mm --offset-y 3mm).calc-emf).The standard describes a layered market rather than a single product category. Qi dominates consumer electronics, from phones and earbuds to the higher 30 W tier aimed at laptops and tablets. AirFuel is the alternative for applications that want spatial freedom: a roughly 100 cm² charging zone and several devices at once. Vehicles are a separate regime. They follow SAE J2954 and ISO 19363 at roughly 85 kHz, where the main driver is the power level, not pocket convenience. Interoperability is therefore the commercial question: whether a given receiver can draw power from a given charger of another brand. The standard answers this with the compatibility matrix and certification tests described later in this chapter.
The overview material ties each class to representative devices:
The scale difference between these entries explains why one record format has to carry both a coil-and-frequency description and a power envelope. A 5 W earbud case and a vehicle pad share the same physics but very different safety margins.
Compliance in this field means passing the schemes the industry already runs. WPC certification for Qi checks power transfer at the BPP and EPP levels, packet structure and timing, minimum efficiency, FOD against standard metal objects, EMI/EMC, and safety limits on temperature, overcurrent and overvoltage. AirFuel Alliance testing checks the 6.78 MHz resonant frequency (±5%), BLE pairing and control, simultaneous multi-device charging, and EMF and thermal limits. Cross-platform testing spans multiple charger brands, several power levels, various alignment offsets and a temperature range from -10°C to 45°C. A certificate is evidence that these tests were passed. It does not replace them.
The data format is organized as envelopes. A charger record carries a charger identifier, the transmitter coil topology (single coil, multi-coil array or dynamic alignment), the operating frequency band, maximum input and output power, the supported communication channel, and the manufacturer's certificate chain. A coil-design descriptor lists the coil geometry (planar circular, square, rectangular, or DD-style for J2954). It also lists the conductor (Litz wire gauge and strand count), turn counts for both sides, inductance in microhenries, AC resistance at the operating frequency, the ferrite shield and the coupling-coefficient envelope. A resonance descriptor adds the resonator topology, the compensation network and the frequency-stability envelope. Resonators are LC tanks with Q of 100-300 for AirFuel, LCC compensation for J2954, or CLC for proprietary systems. The descriptor also covers the multi-device allocation policy and the allowable misalignment in millimetres before efficiency drops below the policy threshold.
The design helpers in the TypeScript SDK mirror these quantities:
import {
calculateChargingEfficiency,
designTransmitterCoil,
detectForeignObject,
optimizeAlignment
} from '@wia/comm-008';
const efficiency = calculateChargingEfficiency({
inputPower: 15, outputPower: 12, distance: 5, frequency: 110000
});
const coil = designTransmitterCoil({
targetPower: 15, frequency: 110000, diameter: 50, turns: 20
});
At run time the API exposes chargers, sessions, telemetry and conformance state:
POST /wireless-charging/v1/chargers # register charger
GET /wireless-charging/v1/chargers/{id} # fetch charger record
POST /wireless-charging/v1/sessions # start charging session
GET /wireless-charging/v1/sessions/{id}/state # current session state
POST /wireless-charging/v1/sessions/{id}/stop # stop session
WS /wireless-charging/v1/telemetry/stream # power/temperature telemetry
GET /wireless-charging/v1/conformance/{id} # WPC/AirFuel/J2954 cert status
Starting a session supplies a charger reference, a receiver descriptor (from NFC detection or BLE discovery), a requested-power envelope, a target state of charge and the user's consent. The service checks the receiver against the charger's compatibility matrix, so a Qi-only charger turns away an AirFuel-only receiver instead of energizing a coil that cannot serve it. The telemetry stream carries power and temperature, which are the two quantities that govern efficiency and safety. Endpoints are discovered through /.well-known/wia-wireless-charging.
The standard lists future work with the AirFuel Alliance, SAE J2954 and ISO 19363 as the reference points. Experimental MHz and GHz beaming is deliberately kept out of this record and catalogued in WIA-COMM-009. The J2954 WPT 4 class at 22 kW is likewise marked experimental. The direction is toward higher power, greater positional freedom and more simultaneous receivers. Each of these puts more pressure on FOD, thermal control and EMF limits.
Wireless charging is controlled energy transfer across a weakly coupled gap. Efficiency depends on k, Q and alignment. Safety depends on detecting what should not be in the field and on limiting heat and exposure. The standard captures these concerns in coil, resonance, FOD and charger records, and in an API that starts sessions and streams power and temperature.
WIA-COMM-008 does not replace the established standards. It sits above them. Qi from the WPC, AirFuel from the AirFuel Alliance, SAE J2954 and ISO 19363 define the radio-frequency behaviour. The WIA records and API describe chargers, coils and sessions consistently across them. A conformance lookup reports WPC, AirFuel or J2954 certificate status through one endpoint. This helps because the certificate chain is attached to the manufacturer's record instead of living in separate vendor documents.
A newcomer should build skills in the order the standard itself builds concepts. Start by using the CLI to calculate efficiency and EMF exposure for a 15 W, 110 kHz design. Then design a transmitter coil and watch how turns and diameter affect inductance. Finally, run through the Qi phases and the FOD check to see where a session can be refused. Cross-platform bench testing across brands, offsets and the -10°C to 45°C range teaches more than any single measurement.
This chapter introduced the scope of the standard. It covered power classes from earbud-scale Qi to vehicle-scale J2954, and the relationships among k, Q and efficiency. It explained the Qi control loop and the protective role of FOD, thermal and EMF mechanisms. It showed how charger and coil records, together with a session API, describe the whole system. The next chapter goes back to the physics underneath. It takes up inductive coupling in detail, beginning with Faraday's law and mutual inductance and continuing to the coupling coefficient and power transfer. Those derivations explain why the numbers in this chapter behave as they do.