Chapter 4

Phase 1: Foundation

Overview

4.1 The Phase 1 Charger-Record Envelope

Phase 1 of WIA-COMM-008 defines the data format for describing a wireless charger and the physics around it. It does not define an API or a protocol exchange. The central idea is the envelope: a bounded, declared description of what a device is allowed to do. The Phase 1 envelopes are the charger record, the coil-design descriptor, the magnetic-resonance descriptor, the foreign-object-detection (FOD) envelope and the EMF-safety envelope. Each one pairs a capability with the limits that make the capability safe to use.

The charger record is the entry point. It groups records by power class, because a 5 W phone pad and an 11.1 kW vehicle pad share physical principles but almost nothing else in their engineering. The four classes are:

Power classTypical membersOperating bandCommunication channel
Low-power inductiveQi 5 W / 15 W (WPC)Qi LF, 87-205 kHzQi in-band ASK
Mid-power resonantQi 30 W+, AirFuel, proprietaryAirFuel HF, 6.78 MHzAirFuel BLE
High-power EVSAE J2954 WPT 1/2/3 at 3.7 / 7.7 / 11.1 kWJ2954, 79-90 kHzJ2954 LIN/CAN sideband
Experimental22 kW WPT 4Catalogued separately (MHz/GHz beaming is in WIA-COMM-009)Per implementation

Besides the class, every charger record carries these canonical fields:

The last field matters more than it looks. A charger that negotiates power with a battery-bearing device is trusted to hold back when something goes wrong. The certificate chain ties each record to the party who is accountable for that behavior.

Technical Foundation

4.2 Coupling, Resonance and the Equations Behind the Fields

The descriptors in Phase 1 only make sense against two physical mechanisms: inductive coupling and magnetic resonance. The specification states both in closed-form relationships, which lets an integrator check a declared record against the physics.

Inductive coupling rests on Faraday's law, ε = −N × dΦ/dt. A time-varying current in the transmitter coil produces flux that links the receiver coil. The induced receiver voltage is V₂ = M × dI₁/dt, where the mutual inductance is

M = k × √(L₁ × L₂)

Here k is the coupling coefficient between 0 and 1. It falls with distance (roughly k ∝ 1/d³ for circular coils) and is highest at perfect alignment. Coil geometry (diameter, turns, wire gauge) and core material (air, ferrite, nanocrystalline) also shape it. The specification gives an approximation based on the two coil radii and the separation d. It also gives a transferred-power relationship, P = k² × Q₁ × Q₂ × P_in.

Magnetic resonance adds capacitors so that each side is tuned to the same resonant frequency, where inductive and capacitive reactance cancel:

f₀ = 1 / (2π × √(L × C))

For strongly coupled resonance the maximum efficiency is

η_max = (k × Q)² / (1 + k × Q)²      with Q = √(Q₁ × Q₂)

The Phase 1 coupling ranges show why this formula matters. The coil-design descriptor expects typical k of 0.1-0.3 for loosely coupled inductive systems and 0.05-0.15 for resonant ones, and quality factors of 100-300 are typical for AirFuel resonators. Two illustrative calculations (not values from the specification) show the interplay:

A high Q cushions the efficiency loss from weak coupling. This is the logic behind the spatial freedom of resonant designs. The specification credits them with longer range (up to 50 mm against 10 mm for simple induction), tolerance of misalignment, simultaneous charging of several devices, and efficiency that degrades more slowly with distance.

A tuning example shows how the resonance formula becomes a design check. To resonate a 1 µH coil at the AirFuel frequency of 6.78 MHz, solve for the capacitance:

ω  = 2π × 6.78e6        ≈ 4.26e7 rad/s
C  = 1 / (ω² × L)       = 1 / (1.815e15 × 1e-6)
C  ≈ 5.5e-10 F          ≈ 550 pF

This is a back-of-envelope figure. Real designs add compensation networks, covered below, and the Phase 1 stability envelope (typically under 1% drift over the operating temperature range) exists because capacitor tolerance and temperature shift f₀ away from the intended value.

Market Analysis

4.3 Qi, AirFuel and J2954 Side by Side

The specification makes no market-share claims, but it does show how the ecosystem divides. Three families dominate the records, and each makes a different engineering trade.

Qi (Wireless Power Consortium) is described as the most widely adopted standard for consumer electronics. Its profiles are:

AirFuel Alliance takes the resonant route. It operates at 6.78 MHz in an ISM band, reaches up to 50 W and a range of 0-50 mm, and uses a Class-E amplifier topology. A charging zone of about 100 cm² gives the user spatial freedom, and power scales from 1 W to 50 W and beyond. Control runs over Bluetooth Low Energy: device discovery, power negotiation, authentication and status monitoring.

SAE J2954 covers vehicles, with WPT 1, 2 and 3 at 3.7, 7.7 and 11.1 kW in a 79-90 kHz band. Its sideband is LIN or CAN, buses that vehicles already carry, rather than a consumer radio.

The three families differ in frequency, so a single record cannot carry a generic "frequency" with no band attached. This is why the Phase 1 charger record fixes the frequency band and the communication channel as separate declared fields, and why proprietary mid-power systems still get a slot in the same schema. Interoperability across vendors starts with the band declaration and the channel declaration.

Industry Applications

4.4 From Phone Pads to Vehicle Pads: Protocol Behavior by Sector

Each application sector uses a different control conversation, and the Phase 1 records name the channel so that later phases know which one to expect.

Consumer devices (Qi). Qi communicates with backscatter, or load modulation: the receiver varies its load at 2 kHz to send data to the transmitter at 2 kbps. Packets carry signal strength, control and power-request information. A packet has the layout:

[Preamble] [Header] [Message] [Checksum]
  11 bits    1 byte   0-27 bytes   1 byte

A Qi session moves through six phases:

  1. Selection: detect an object on the surface.
  2. Ping: send an analog ping to look for a receiver.
  3. Identification: the receiver identifies itself.
  4. Configuration: the two sides negotiate a power level.
  5. Power Transfer: power flows under a control loop.
  6. Renegotiation: power is adjusted as conditions change.

The operating frequency within Qi is set in discrete steps, f = f_base + (n × 64) Hz. For BPP, f_base is 110 kHz and n runs from 0 to 1470, which gives a valid range of 110-205 kHz. The frequency is the control variable. The transmitter nudges it toward or away from resonance to raise or lower delivered power.

Multi-device and spatial-freedom products (AirFuel). Because several receivers can share one resonant field, the magnetic-resonance descriptor must say how many receivers are supported, what coupling cross-talk looks like between them, and the per-device power-allocation policy. It must also state how far a receiver may sit from the ideal position, in millimetres, before efficiency falls under the policy threshold.

Electric vehicles (J2954). The coil geometry is DD-style, the compensation network is LCC, and control rides a LIN/CAN sideband. A vehicle pad has alignment tolerance and thermal loading that a phone pad never meets, which is why dynamic alignment is a separate coil-topology value in the charger record.

Standards Compliance

4.5 Foreign Object Detection and EMF Safety

Two envelopes carry the safety case. They cross-reference each other, since a metal object that heats up is both a thermal hazard and a source of altered field exposure.

The FOD envelope. A metal coin or key between the coils absorbs field energy and heats. The envelope lists the detection method in use:

Power-loss accounting rests on a simple comparison. The transmitter knows how much power it sends and the receiver reports how much it receives, so unexplained loss suggests something is absorbing the difference. Q-measurement works differently: a metal object lowers the transmitter coil's quality factor, as the ωL/R relationship predicts when added resistance appears.

Beyond the method, the envelope records the false-positive and false-negative envelope, the response time (typically under 500 ms from object placement to power cut-off), and a fail-safe policy with three outcomes:

Detection resultRequired behavior
UncertainReduce power
Clear positivePower off
Clear negativeContinue

The middle ground matters. Cutting power at every ambiguity makes a charger unusable, and ignoring ambiguity makes it dangerous, so the fail-safe envelope settles the middle case as reduced power.

The EMF-safety envelope. Exposure limits follow the ICNIRP 2010/2020 guidelines for the general public and for occupational exposure at the operating frequency, plus IEEE C95.1-2019 where adopted. The envelope holds a per-coil-region exposure profile. The reference values are 1 mT of B-field at the body surface for Qi LF and 27 V/m of E-field for AirFuel HF. It also holds the perpendicular distance from accessible surfaces and a user-warning envelope. The warnings address people with active implantable medical devices (pacemakers, ICDs, neurostimulators, cochlear implants) and draw on ISO 14117 and IEC 60601-1-2.

The companion conformance test suite exercises these records and exchanges end to end, so a manufacturer can check its envelopes before certification.

Implementation Considerations

4.6 Writing the Coil and Resonance Descriptors

The coil-design descriptor gathers the physical choices that determine L, R and k. It lists:

Several fields exist to counter specific loss mechanisms. Skin effect pushes current to the conductor surface at high frequency and raises AC resistance, which is why Litz wire, made of many insulated strands, is declared with its strand count. Lower AC resistance gives a higher Q and better efficiency. Ferrite behind the coil raises inductance by roughly 2-5×, directs flux forward and shields electronics from stray fields. MnZn grades such as PC40, PC95 and 3F3 are common. For a flat spiral coil the specification supplies the estimate L ≈ (μ₀ × N² × r²) / (8r + 11w), so a declared turn count and mean radius can be checked against the declared inductance.

A cross-field consistency check is cheap and catches typos. Q = 2πfL/R must be plausible for the declared band: a descriptor claiming Q in the AirFuel range with a high AC resistance at 6.78 MHz contradicts itself.

The magnetic-resonance descriptor adds resonator topology (an LC tank for AirFuel, LCC compensation for J2954, CLC for proprietary designs), the per-side compensation network, the impedance-matching envelope, the frequency-stability envelope, the multi-device parallel-charging envelope and the spatial-freedom envelope.

For integration, the supplied reference container ships every envelope with mock data. The recommended path is to run the test suite against the container, swap in real backends one endpoint at a time, and only then onboard peers.

Future Outlook

4.7 Where the Envelopes Are Likely to Stretch

Phase 1 already anticipates growth. The experimental class holds 22 kW WPT 4, a step beyond the 11.1 kW WPT 3 tier. Free-space beaming at MHz and GHz frequencies is deliberately kept outside this standard, in WIA-COMM-009, so that near-field charging records do not have to describe radiated power.

Three technical trends sit naturally inside the existing envelopes:

Within the 1.x line the compatibility rule governs how these changes arrive. Hosts may add optional fields and new envelopes, but must not remove existing ones, so a charger record written today stays readable.

Review Questions

4.8 Check Your Understanding

  1. Why does the charger record declare the operating band and the communication channel as separate fields instead of one "protocol" field? Use Qi, AirFuel and J2954 as examples.
  2. A coupling coefficient falls from 0.1 to 0.05 while Q stays at 100. Using η_max = (kQ)² / (1 + kQ)², compute the change in maximum efficiency and explain what a higher Q buys.
  3. List the six Qi power-transfer phases. In which phase does the receiver first state its power request, and which phase lets power change during a session?
  4. Calculate the capacitance that resonates a 2 µH coil at 6.78 MHz. Which Phase 1 field bounds how far the real frequency may drift from this ideal?
  5. Describe the three-way fail-safe policy in the FOD envelope. Why is "uncertain → reduced power" preferable to either extreme?
  6. Which exposure reference values does the EMF envelope record for Qi LF and AirFuel HF, and which standards support the warning for pacemaker users?
  7. Explain how Litz wire and ferrite shielding each improve efficiency, and which descriptor fields record them.

Summary

4.9 Summary and the Road to Phase 2

Phase 1 is a vocabulary of bounded descriptions. The charger record places a device in one of four power classes and fixes its band, topology, power limits, communication channel and certificate chain. The coil and resonance descriptors turn L, C, Q and k into declared, checkable values. The FOD envelope specifies how a charger notices a stray metal object and what it does when it is unsure. The EMF envelope ties exposure references to ICNIRP and IEEE guidance and to warnings for implant wearers. Each field exists to prevent a specific failure: a mistuned resonator, a lossy coil, a heated coin, or an exposed patient.

These records are the wire-format contract of the four-Phase WIA architecture. Phase 2 exposes them over HTTPS, Phase 3 wraps them in protocol exchanges across trust boundaries, and Phase 4 integrates with the wider ecosystem. The next chapter moves from the shape of the data to the interfaces that serve it. It shows how a client reads and submits these envelopes, and which behaviors the interface must honor when a detection result or a power negotiation changes mid-session.