Chapter 7
Phases 1 through 3 of WIA-COMM-008 settle what a wireless-charging system says and how it says it. Phase 4 asks how the system behaves once it sits among the other standards that touch it. The Phase 4 scope names six: WPC (Qi), AirFuel, SAE, IEC, ICNIRP and ISO 14117. Each governs a different layer. WPC and AirFuel govern the air interface for consumer devices. SAE and IEC govern electric-vehicle power transfer. ICNIRP limits what a human body may be exposed to. ISO 14117 covers electromagnetic compatibility with active implantable medical devices.
Optimization here is not a hunt for maximum watts. A wireless charger trades efficiency, heat, field strength, alignment tolerance and cost against one another. Each trade is bounded by a limit that someone else's standard defines. The practical question for an integrator is where the design sits inside those bounds and how the system proves it.
This chapter uses the specification's own material: the EMF safety rules, the EV power classes, the multi-device architectures, the design checklists and the standards cross-walk. It shows how they fit together in a deployed product or installation.
Everything in Phase 4 rests on a few relationships. The first is the magnetic field on the axis of a transmitter coil, which the specification gives as:
B(d) ≈ (μ₀ × N × I × r²) / [2 × (r² + d²)^(3/2)]
B = magnetic flux density (tesla)
μ₀ = 4π × 10⁻⁷ H/m
N = number of turns
I = current (amperes)
r = coil radius (meters)
d = distance from coil (meters)
The formula has two practical consequences. Field strength scales linearly with ampere-turns, so lowering current is a direct way to lower exposure, at the cost of delivered power. Far from the coil, where d is much larger than r, the denominator behaves like d³. That is the inverse-cube behaviour the specification cites: doubling the distance cuts the on-axis field to roughly one eighth. Distance is therefore the cheapest safety margin available. The specification lists four mitigations: ferrite sheets behind the transmitter coil, an aluminum shield around sensitive electronics, distance, and reduced current.
The exposure limits against which this field is judged are stated in the specification as follows.
| Guideline | Frequency range | Magnetic field (RMS) | Electric field (RMS) | Other |
|---|---|---|---|---|
| ICNIRP 2010 | 110–205 kHz (Qi band) | 6.25 μT | 83 V/m | SAR 2 W/kg (localized) |
| IEEE C95.1 (2019) | 3 kHz – 10 MHz | 27 μT | 614 V/m | — |
The second relationship governs multi-device charging. Each device receives the lesser of what it asked for and an equal share of the charger's output:
P_i = min(P_requested_i, P_max / N)
As written, this rule is conservative and simple. It never gives a device more than its equal share, and it does not hand unused share to a hungrier neighbour. Whether to add a redistribution policy on top is a product decision, discussed in 7.6.
The third foundation is the EV power-class ladder from SAE J2954, which sets the scale for vehicle-side integration.
| Class | Power | Voltage | Use case | Target efficiency (GA to battery) |
|---|---|---|---|---|
| WPT1 | 3.7 kW | 400 V | PHEV, small BEV | not stated |
| WPT2 | 7.7 kW | 400 V | Passenger BEV | >85% |
| WPT3 | 11 kW | 400 V | Large BEV | >88% |
| WPT4 | 22 kW | 800 V | Fast charging | >90% |
The specification does not quantify market size, and this chapter does not invent figures. It does describe the segments with enough structure to show where integration effort concentrates.
The commercial pull is toward convergence. The future-directions material lists cross-vendor interoperability between Qi v2.0 and AirFuel through dual-mode chargers. A dual-mode product must carry both the 110 kHz and 6.78 MHz sets of coil design, communication and compliance obligations. Integration pressure therefore grows with every ecosystem a product joins.
Multi-device surfaces. The specification describes three architectures with distinct trade-offs. A multi-coil array uses 3–9 coils in a grid and activates the coils under devices, so each device gets a dedicated coil. A single large coil covers the whole surface and shares power, with lower efficiency because the field is shared. A guided-positioning design uses 1–3 coils with mechanical guides and marked zones, which gives high efficiency through alignment. When one power stage serves several coils, time-division multiplexing switches between them at 10–100 Hz, with equal or priority-based duty cycle. The advantage is simpler power electronics. Array chargers for desks, countertops and vehicle rear shelves additionally need an active coil-selection envelope that decides which transmitter coils to energize.
Vehicle charging. The ground assembly (GA) uses a 500–800 mm coil embedded in pavement, with a reported efficiency range of 85–93%. The vehicle assembly (VA) is mounted underneath the vehicle at 100–250 mm ground clearance. Alignment tolerance is ±75 mm for WPT2 and ±100 mm for WPT3. Achieving that tolerance in practice is an integration task. The OEM material describes an alignment-estimation pipeline that combines visual feedback, ultrasonic sensing and vehicle-side coil sensing. For ADAS-equipped vehicles, that pipeline is aligned with the parking-assist subsystem. The same OEM scope covers pad placement (front, mid or rear), a vehicle-frame Faraday-shield envelope, on-board secondary-resonant tuning, in-vehicle HMI for charging status, and over-the-air updates of receiver firmware.
Dynamic charging. In-road coils embedded across lanes switch on as a vehicle passes, delivering 20–100 kW per vehicle. The named applications are electric buses and autonomous shuttles. On the infrastructure side, integration covers road-side power distribution, per-pad utilisation reporting and predictive maintenance for pads with high cycle counts.
The specification provides an informative cross-walk. Implementers obtain authoritative copies from the issuing bodies. Condensed, it assigns each concern as follows.
| Concern | Standard |
|---|---|
| Low-power inductive (Qi) | WPC Qi v1.3 / v2.0 |
| Resonant | AirFuel Alliance specifications |
| EV wireless charging | SAE J2954 |
| EV in-band sideband | SAE J2847/6 |
| EU-harmonised EV WPT | IEC 61980-1 / -2 / -3 |
| EMC: radiated / vehicle / immunity | CISPR 11 / CISPR 25 / IEC 61000-4 series |
| RF compliance (US / EU) | FCC 47 CFR Part 15 and Part 18 / RED Directive 2014/53/EU |
| EMF public exposure | ICNIRP 2010 + 2020 |
| Implantable medical devices | ISO 14117 + IEC 60601-1-2 |
| Battery-charger safety | IEC 62368-1 |
The reference list also names ISO 19363 and IEC 63028 for EV wireless power transfer, and UL 2738 for low-power wireless charging equipment.
Three compliance themes need design effort rather than paperwork. The first is human exposure: the field must stay within the limits in 7.2 at the places people can reach. The second is implants. The safety integration material asks for no metallic warning labels in mandatory contact zones, a dedicated screen or voice warning aligned with ICD and pacemaker manufacturer guidance, and a minimum-clearance envelope for active implantable devices. The third is the vehicle: no underbody activity during active J2954 charging, and vehicle-presence detection before power-on. After installation, EMC is re-verified on a defined cadence. Accessibility is handled through WCAG 2.2 plus alignment aids for low-vision users, namely an audible cue and a haptic cue on the device.
The specification gives an ordered transmitter design path: select a power level (BPP 5 W, EPP 15 W or higher); choose a frequency (110 kHz for Qi or 6.78 MHz for AirFuel); design the coil, covering turns, wire gauge and ferrite; implement foreign object detection by the Q-factor or power-loss method; add an NTC thermistor in the coil; design the power electronics, a full-bridge inverter with controller; and implement communication, which means demodulating backscatter for Qi or using BLE for AirFuel. The receiver path mirrors it. It starts from device requirements and a coil that fits the form factor, adds a synchronous or diode rectifier and a buck/boost regulator, includes overvoltage, overcurrent and thermal protection, and finishes with load modulation (Qi) or BLE (AirFuel).
The order matters because early choices constrain later safety margins. The frequency choice decides which exposure table applies and which communication method is available. The coil design sets the ampere-turns needed for a target power, and that sets the field the shielding must manage. Foreign-object detection and the thermistor are the transmitter's defence against metal that heats up in the field.
For multi-device products, the allocation rule from 7.2 behaves as follows when applied directly:
P_max = 15 W, N = 3
requests: 5 W, 10 W, 2 W
P_1 = min(5, 15/3) = 5 W
P_2 = min(10, 15/3) = 5 W
P_3 = min(2, 15/3) = 2 W (3 W of capacity unallocated)
The unallocated 3 W is a design decision. A product may leave it idle for simplicity and thermal headroom, or add a policy that redistributes it. Time-division multiplexing with priority-based duty cycles is one route to that policy. Either way, the designer should record the choice and verify it against the heat and EMF limits.
The release gate is the specification's safety checklist: FOD implemented and tested; temperature monitoring with cutoff; overcurrent protection; overvoltage protection; EMF exposure within limits; UL/CE/FCC certification obtained; and a user manual with safety warnings. For software integration, the specification adds a conformance test suite and a reference container with mock data. Under the 1.x compatibility promise, existing envelopes and endpoints stay reachable and hosts may add optional fields. That is enough to run integration tests before real backends exist.
The specification lists active research tracks, and each one stresses a particular part of the integration picture.
These directions share a pattern. Each widens what the charger can do while tightening the demand on detection, alignment and exposure control. Proposals for them are tracked through the standard's committee process, so the roadmap remains part of the ecosystem rather than an afterthought.
Phase 4 treats optimization as the work of fitting a charger inside limits set by other parties. The field equation shows that ampere-turns and distance control exposure, while shielding and reduced current give additional margin. The allocation rule shows how a shared charger divides finite power, and leaves a clear policy decision about unused capacity. The J2954 classes, with their efficiency targets and alignment tolerances, show how the same ideas scale to vehicles. The cross-walk ties each concern to an owning standard, from Qi and AirFuel to CISPR, FCC, RED, ICNIRP, IEEE C95.1, ISO 14117 and IEC 62368-1. The transmitter and receiver design sequences and the safety checklist turn those standards into a build order and a release gate.
The next chapter moves from integration to the reference layer. It collects the standards documents and technical references that the cross-walk points to, including the Covic and Boys survey of inductive power transfer. The goal is to show where an implementer finds authoritative text for each limit and requirement used here.